ZX-2 Ultrasound Wall Thickness Gauge
The ZX-2 is an easy to operate ultrasound wall thickness gauge with the ability to locate blind surface pitting and corrosion on a wide variety of materials with an accuracy of ±0.001".
This Ultrasound Wall Thickness Gauge provides a selectable material list with 8 preset materials including steel, aluminum, cast iron, plexiglass, pvc, polystyrene and polyurethane as well as 2 custom material velocities for optimal tuning of the calibration to a specific type of material.
The device has a robust impact-resistant aluminum housing for deployment in difficult industrial conditions. Speed settings can also be locked to prevent accidental changes.
Total measuring range (depending on material and probe type):
0.63 - 914.4 mm
Measuring range in steel (with standard T-102-2000 probe):
1,00 - 199,9 mm
The ZX-2 Ultrasound Wall Thickness Gauge has a guarantee of 5 years.
- Measuring range:
1.00 - 199.9 mm (with standard probe) - 0.63 - 914,4 mm (depending on probe and material) - Resolution of 0.01 mm
- Measuring unit switchable between mm and inch
- High visibility LCD Display is readable in all lighting conditions and temps as low -30 °C
- Selectable Backlight ON/OFF/AUTO
- Impact-resistant and environmentally sealed (IP 65) extruded aluminum housing
- The probe is waterproof and can be submerged in water
- 5 Year Warranty
Zeroing:
Automatic or manual zeroing of the probe.
Probe diameter:
Specify the probe diameter for increased linearity.
Differential mode:
Returns the ± difference from an entered nominal value.
Velocity Settings: Adjustable on keypad
Alarm Mode:
Adjustable maximum and minimum limits. Exceeding the limit warns a visual and audible alarm.
 | Minimum Radius for Convex Surfaces | 8.89 mm |
| Minimum Radius for Concave Surfaces | 76.2 mm | |
 | Minimum Headroom | 25.0 mm |
 | Minimum Sample Diameter | 3.8 mm |
 | Minimum Substrate Thickness - F | na |
| Minimum Substrate Thickness - NFe | na |
The ZX-2 is delivered in a complete kit in a foam-fitted carrying case with the measurement gauge, probe, 120ml bottle of coupling fluid, 2 AA batteries, NIST-Traceable calibration certificate and operating instruction manual.
| Total Measuring Range (steel): | 0.63 - 914.4 mm (depending on material and probe type) |
| Measuring Range (Steel): | 1.00-199.9 mm (with standard probe T-102-2000) |
| Resolution: | 0.01 mm |
| Measuring Mode: | Pulse-Echo (P-E) |
| Velocity range: | 305 to 18,542 meters/sec |
| Probe (standard): | 1/4", 5 MHz Dual Element Transducer, actual wearface is 5/8" (17mm), p/n T-102-2000 |
| Probes (optional): | 1 to 10 MHz, 3/16" up to 1 inch (custom probes available) |
| Cable: | 1.2m (4ft.) waterproof cable with non-polarized, quick-disconnect connectors |
| Display: | Large LCD display with 4.5 digits each 1.3 cm high -Adjustable backlight -Division into individual segments to ensure clear reproduction of advanced information |
| Display refresh rate: | 10 Hz (10 updates/sec) |
| Temp. Limits: | Material: -20 to 100 ° C. High temperature probes available |
| Battery Type: | 2x AA batteries (rechargeable batteries can be used) |
| Battery Life: | 45 hours continuous use |
| Housing: | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed) |
| Housing Rating: | IP65 |
| Weight: | 308 grams |
| Pulse Repetition Frequency (PRF): | 200 Hz (200 pulses/sec) |
| Dimensions: | 63.5 x 131.3 x 31.5 mm |
| Certifications: | NIST Traceable |
| Guarantee: | Device: 5 Years Probes: 90 Days |
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request