TSA750 hand lever operated horizontal or vertical force test stand
The TSA750/TSA750H manual force test stand comes in a vertical and horizontal version, has a capacity of up to 3,75 kN (3750 N) and works for tensile and compression testing.
With its rugged aluminum components this test stand is well equipped for use in challenging conditions while the lever operation ensures quick action testing.
Yet the precision machined rack and pinion system, included adjustable travel stops and frictional low force brake make it precise enough for laboratory environments.
With this test stand the Loading lever, moving part, is mounted to the column below the force gauge mount, this holds the force gauge in a stationary position moving the base plate up and down.
One of the benefits of this setup is that there is a space of 76mm from the column to the center of the measurement position.
The TSA750 test stands come in a complete kit with a number of standard accessories, depending on the version, vertical or horizontal.
In addition to the standard setup a digital travel display, TSA001, is available. For output to a pc a cable, AC1112, and a communication adapter, MRS100A, are required.
A set of wall mounts, TSA002, makes it possible to adapt the test stand to a bench or wall mounted instead of the base.
A mounting table kit, TSA003, contains a matrix with tapped holes for, off center, grip and fixture mounting for easy alignment of test samples.
Column extensions make it possible to test larger samples. Column extensions just increase the sample clearance they do not change the travel distance.
A complete test setup can be made in combination with the whole range of Mark 10 digital force gauges, attachments and gripping fixtures.
The reversible gauge mounting plate makes this test stand compatible with force gauges of all capacities.
In addition a wide range of adapters is available to use this test stand in combination with force gauges from other manufacturers.
- Compatible with all Mark-10 force gauges, accessories and grips
- Loading lever can be positioned in 30° increments for ease of operation
- Threaded holes for bench mounting
- Adjustable travel stops
- Precision ground rack and pinion mechanism
- Adjustable wear plates for smooth, precise motion
- Frictional low force brake on lever mechanism
- Optional digital travel display
- Optional Mounting Table Contains a matrix tapped holes for grip and fixture mounting
| Model | Force capacity | Maximum test travel | Loading method | Travel rate | Maximum, sample clearance |
|---|---|---|---|---|---|
| ES10 | 500N | 229mm | Spring loaded lever | 26,7mm / lever rev. | 229mm |
| ES10 | 500N | 229mm | Spring loaded lever | 26,7mm / lever rev. | 229mm |
| ES20 | 500N | 229mm | Top mounted hand wheel | 1,5mm / wheel rev. | 229mm |
| ES30 | 1000N | 330mm | Side mounted hand wheel | 1,3mm / wheel rev. | 356mm |
| TSA750(H) | 3750N | 95mm with travel stops 152 without travel stops | Lever with rack & pinion, lever can be positioned in 30° increments | 76,2mm / lever rev. | Vertical 267mm Horizontal 368mm |
| TSB100 | 500N | 95mm with travel stops 152 without travel stops | Lever with rack & pinion, lever can be positioned in 30° increments | 76,2mm / lever rev. | 330mm |
| TSC1000(H) | 5000N | 89mm | Inline hand wheel | 2,5mm / wheel rev. | Vertical 254mm Horizontal 330mm |
| TSF(H) | 5000N | 102mm | Side mounted hand wheel | 0,34mm / wheel rev. | Vertical 356mm Horizontal 459mm |
| - Maximum travel and/or clearence depends on the grips or fixtures used during testing. The dimensions indicate distances without the use of grips or fixtures. - Column extensions are available for all test stands except ES05, ES10 and ES20. - Models with (H) are available in vertical and horizontal versions | |||||
The TSA750 and/or TSA750H test stands come with the following accessories:
- G1009 compression plate, 2” dia.
- G1028 small hook
- G1030 thread adapter, 5/16-18M to #10-32F
- G1035 large hook
- G1038 medium hook
- G1041 thread adapter, 5/16-18M to #1/2-20M
- G1042 extra large hook
- G1091 thread coupler, 1/2-20F, 1/2-20F
- 5/16-18 stud with jam nuts
- #10-32 stud with jam nuts
- Wrench 5/16-3/8
- Base (TSA750)
- 2 Mounting leg with hardware (TSA750H)
- Additional column cap with hardware (TSA750H)
- 4 Thumb screw for force gauges with 0.12 - 500 lbF capacities
- 4 Thumb screw for force gauges with 1,000 - 2,000 lbF capacities
- Allen wrench set
Size measurements for the TSA750 Manually operated Force Test Stand
All sizes in inch and (mm)
Size measurements for the TSA750H Horizontal manually operated Force Test Stand
All sizes in inch and (mm)
AC1004 Mounting Kit for 5I, 3I or TT03 to TS-Series Test Stands
- Mounting Kit for 5I, 3I or TT03 to TS-Series Test Stands
More details
| Load capacity: | 3.75 kN (750 lbs) |
| Maximum travel: | 152 mm without stops 95mm with stops |
| Dimensions: | 152 mm x 197 mm x 645 mm |
| Loading method/rate: | Rack & pinion / 76mm per rev. |
| Weight: | TSA750: 7.3 kg (16 lbs) TSA750H: 5,9 kg (13 lbs) |
| Shipping weight | TSA750: 10.9 kg (24 lbs) TSA750H: 8,6 kg (19 lbs) |
| Travel display: | Optional |
| Horizontal mount: | Optional |
| Warranty | 3 Years |
TSA750H Manual test stand
- Mounting holes for bench or wall mounting
- Adjustable wear plates for smooth, precise motion
More details
Series-3 Digital Force Gauge
- High-speed 2.000 Hz sampling rate
- USB data output of continuous or individual data points
More details
Series-4 Advanced Digital Force Gauges
- High-speed 3.000 Hz sampling rate
- USB, RS-232, Mitutoyo, and analog outputs
More details
Series-5 Advanced Digital Force Gauge
- ±0,1% accuracy
- High-speed 7.000 Hz peak sampling rate
- 1.000-point data memory with statistics and outputs
More details
Availability: Available: 1 - 3 days, Delivery time: 1 - 3 weeks, special order request